ANTIFERENCE Conexer DMHD01 Instrukcja Użytkownika Pobierz pdf (Strona 5)

3.2 Powering Up

Plug in the connector of the power supply. The display will

show the CONEXER logo while booting. Once the modulator

has booted correctly the main menu will appear.

In the rst line the model number is displayed (DMHD01)

followed by the installed rmware version.

When the modulator is encoding, the actual resolution is

displayed in the bottom line of the display. When the modulator

is initialising, the text “INIT” is displayed at the bottom line.

2.1 - Using High Denition HD LCN

In some systems you may want to broadcast a version of a programme in Standard Denition

(SD) at the same time as High Denition (HD). With HD LCN numbering, you can force HD

Television sets to follow the HD LCN numbering and SD Television sets to follow the LCN

numbering for those programs which are transmitted in duplicate. For example: You want to

broadcast a BBC television programme in SD version as well as in HD. Application of HD LCN

would be:

BBC1 LCN: 5 HDLCN: 55

BBC1HD LCN: 55 HDLCN: 5

Television sets with the HD tuner will now put BBC1 HD on number 5 and BBC1 on channel 55

Television sets without the HD tuner will now put BBC1 HD on number 55 and BBC1 on

channel 5.

DMHD01

3 - Installation and menu structure

3.1 - Installation

Install the DMHD01 against a wall using the wall xing brackets to ensure cooling of the

housing through natural convection. (see

drawing)

Connect the audio and video source using

HDMI, PC or component VIDEO and

ANALOGUE audio cables. Connect the RF

input cable (if present) and the RF output

cable. If the input is not used, please connect

a 75 ohm terminating resistor to it. Once

the modulator is installed and the cables

connected, please proceed connecting the

power supply to the modulator.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

ANTIFERENCE Conexer DMHD01 Instrukcja Użytkownika Strona 5